Oven Cooking - Maytag 8113P299-60 User Manual

Oven Cooking

Electronic Clock and Oven Control
FUNCTION PADS
➢ Press the desired pad.
➢ Press, or press and hold, these
pads to enter time, oven tempera-
ture or to select HI or LO broil.
➢ Press CANCEL pad to cancel all
operations except the Timer and
Clock.
BAKE PAD
Use for baking or roasting.
1. Press Bake pad.
2. Press More + or Less - until the cor-
rect oven temperature appears in the
display.
See page 8 for additional information.
BROIL PAD
Use for top browning and broiling.
1. Press Broil pad.
2. Press More + or Less - for HI or LO
broil.
See page 10 for additional information.
CLEAN PAD
Use to set self-clean cycle.
1. Press Clean pad. "--:--" will appear in
the display.
2. Press More + or Less - pad. "3:00"
hours of cleaning time will automati-
cally be entered.
3. If more or less cleaning time is
desired, press More + or Less - pad
to select times between 2 to 4 hours.
See pages 12-13 for additional informa-
tion.
CONTROL LOCK PAD
The touch pads on the control can be
locked to prevent unwanted use. They
will not function when locked.
If an oven function is currently being
used, the controls cannot be locked.
The current time of day will remain in the
display when this feature is activated.
TO SET: Press Control Lock pad for
three seconds. The OFF indicator word
will appear in the display for 15 seconds.
OFF will reappear for 15 seconds if any
pad is pressed.
TO RESTORE CONTROL OPERA-
TION: Press and hold the Control Lock
pad for three seconds. The indicator
word OFF will diappear.
COOK TIME/
STOP TIME PADS
Use to program the oven to start and
stop automatically.
1. Press Cook Time pad and enter the
desired cooking time.
2. Press the Bake pad and enter oven
temperature.
3. To delay the start of cooking, press
the Stop Time pad and enter the
time you wish the oven to turn off.
See pages 11 for additional information.
SETTING THE CLOCK
1. Press Clock pad.
2. Press or press and hold More + or
Less- pad until the correct time of
day appears in the display.
The display will flash when electrical
power is first supplied to the range or
if there has been a power failure.
To recall the time of day when another
function is displayed, press the Clock
pad.
Clock time cannot be changed when
the oven has been programmed for
clock controlled cooking, self-clean or
delayed self-clean.
SETTING THE TIMER
The timer can be set from one minute
(0HR:01) up to 99 hours and 59 min-
utes (99:59).
The timer can be used independently
of any other oven activity and it can be
set while another oven function is
operating. THE TIMER DOES NOT
CONTROL THE OVEN.
1. Press the Timer pad.
➢ The indicator word TIMER will
flash.
2. Press or press and hold the More+
or Less- pad until the correct time
appears in the display.
➢ The timer will start automatically
after four seconds. A flashing
colon indicates that the timer is
in use during another function's
operation.
➢ The last minute of the count-
down will be displayed as sec-
onds.
3. At the end of the time set, one long
beep will sound. (To change the
number of timer beeps, see below.)
TO CANCEL: Press and hold the
Timer pad for three seconds. The time
of day will reappear in the display.
6