Download
Share
Print this page
  1. Manuals
  2. Brands
  3. Maytag Manuals
  4. Ranges
  5. PER5710BAW
  6. Installation instructions manual

Maytag PER5710BAW Installation Instructions Manual

Electric 30-inch free-standing slide-in & drop-in ranges
Hide thumbs
1
2
3
4
5
6
7
8

Advertisement

Quick Links

Download this manual See also: Installation Manual
INSTALLER:
LEAVE
THESE
INSTRUCTIONS
WITH
THE APPLIANCE
INSTALLATION
MANUAL
Electric 30-inch Free-standin
Slide-in & Drop-in Ranges
PLEASE KEEP THIS MANUAL FOR FUTURE REFERENCE
THE MANUAL IS INTENDED TO ASSIST IN THE INITIAL INSTALLATION AND ADJUSTMENTS
OF THE RANGE.
Only qualified personnel should
install or service this range.
Read "Safety
Instructions"
in the
Use & Care book before using
range.
Improper installation, adjustment,
alteration, service, maintenance or
use of range can result in serious
injury or property damage.
CLEARANCE DIMENSIONS
For complete information
in regard to installation
of free-standing,
drop-in and slide-in ranges,
see figures 1 through 4 on pages 2, 3 and 4. For
SAFETY CONSIDERATIONS
do not install a
range in any combustible
cabinetry which is not
in accord with the installation clearances
shown
in figure 1.
CAUTION:
Some cabinets and building
materials are not designed to withstand the
heat produced by the normal safe operation
of a listed appliance.
Discoloration
or
damage, such as delamination,
may occur.
Your _range may not be equipped with some of the
to in this manual.
8101 P371,60
0 0-2000-00)

Advertisement

loading

  Also See for Maytag PER5710BAW

Maytag PER5710BAW Installation Manual
Maytag PER5710BAW Installation Manual 22 pages

  Related Manuals for Maytag PER5710BAW

  Summary of Contents for Maytag PER5710BAW

  • Page 1 INSTALLER: LEAVE THESE INSTRUCTIONS WITH THE APPLIANCE INSTALLATION MANUAL Electric 30-inch Free-standin Slide-in & Drop-in Ranges PLEASE KEEP THIS MANUAL FOR FUTURE REFERENCE THE MANUAL IS INTENDED TO ASSIST IN THE INITIAL INSTALLATION AND ADJUSTMENTS OF THE RANGE. CLEARANCE DIMENSIONS For complete information in regard to installation Only qualified personnel should...

  • Page 2: Mobile Homes

    MOBILE HOMES LOCATING THE RANGE The installation of a range designed for mobile home Place range in a well lit area. Do not set range over holes installation must conform with the Manufactured Home in the floor or other locationswhere it may be subject to Construction and Safety Standard, Title 24 CFR, Part strong drafts.
  • Page 3 25" NORMAL COUNTER 36" COUNTER DEPTH TOP HEIGHT 5 3/4' ,30" CAB INET 24" CABINET OPEN I NGS, DEPTH . UPPER LOWER.._,,,/ & PROVIDE FOR 120/208, 120/240 VOLT OUTLET PER APPLICABLE CORD IN THIS AREA, FIGURE 2 FORMED FRONTEDGE, S HAVE RAISED SECTION TO CLEAR TOR ROVIDE FOR 120/208, 120/240 VOLT OUTLET...
  • Page 4 NOTE: ONCABINET TOPS WITH FORMED F RONT E DGE, SHAVE RAISED S ECTION TOCLEAR TOP, 1/'4"CUTDEPTH 120/208, 1 20/240 VOLTJUNCTION BOXFORRANGE CONDUIT BELOW UNIT. 1 1/4" 36"COUNTER TOPHEIGHT 27 1/2" FROMTOPOF 25"MINIMUM| COUNTER COUNTER _. 30" CABINET OPENING .,_CABINET RECOMMEND T HEUSEOF DEPTH NOTE:BEFORE 31/2"...
  • Page 5 ANTI-TIP DEVICE INSTALLATION INSTRUCTIONS WARNING: A risk of range tip-over exists if the appliance STEP 2 - Anti-Tip Bracket Installation is not installed in accordance with the provided installation Wood Construction: instructions. The proper use of this device minimizes the Floor: Locate the center of the two holes identified risk of TIP-OVER.
  • Page 6 ANTI-TIP DEVICE INSTALLATION INSTRUCTIONS STEP 3 - Range Installation Free-standing and slide-in ranges may be _nstalled by D. For SAFETY CONSIDERATIONS as well as optJraum one person. The drop-in requires two persons due to performance adjust the range so that it is level. This adjusting leveling legs and making electrical may be checked by placing a spirit level or a large connection while range is suspended in cut-out.
  • Page 8 FIGURE 8 FIGURE 9 3-Wire Service Cord or Conduit Installation 4-Wire Service Cord or Conduit Installation (Mobile Homes Or As Required By Codes) 1. Insure that the copper ground strap IS CONNECTED between the middle post of the main terminal I.