Connect Vent; Level Dryer - Maytag W10240579B Installation Instructions Manual

38.
Turn on cold water faucet
Check that the water faucets are turned on.
39.
Check for leaks
Check for leaks around "Y" connector, faucet, and hoses.

CONNECT vENT

40.
Connect vent to exhaust outlet
Using a 4" (102 mm) clamp, connect vent to exhaust outlet
in dryer. If connecting to existing vent, make sure vent is
clean. Dryer vent must fit over dryer exhaust outlet and inside
exhaust hood. Check that vent is secured to exhaust hood
with a 4" (102 mm) clamp.
18
41.
move dryer to final location
Move dryer to final location, taking care not to crush or kink
vent.
After dryer is in place, remove corner posts and cardboard
from under dryer.

LEvEL DRYER

42.
level Dryer
Place
level here
Check levelness of dryer from side to side. Repeat from
front to back.
noTE: The dryer must be level for the moisture sensing system
to operate correctly.
Not Level
lEVEl
Not Level