Muratec MFX-C2828 User's Manual Copy Operations page 66

5.1 [Basic]
Settings
[Binding Position]
[Original Direction]
[No]
[2in1]
Configure the binding position of the original and copies to be output.
Without setting the [Binding Position], the resulting copy may not be what
you intended.
When [1-Sided > 1-Sided] is selected, the [Binding Position] cannot be set.
[Original Binding Po- Select the original binding position from [Left
sition] Bind], [Right Bind], [Top] and [Auto].
•
•
[Output Binding Posi- Select the output binding position from [Left
tion] Bind], [Right Bind], [Top] and [Auto].
•
•
Select the orientation of the original loaded into the ADF or placed on the
Original Glass.
Without setting [Original Direction], the resulting copy may not be what you
intended.
Disables combined copy.
Copies images on two original pages on one sheet of paper.
Portrait original pages
Landscape original pages
If the binding position for the original is set to
[Auto], the position of the binding margin is
automatically selected. A page margin posi-
tion along the long side of the paper is select-
ed if the original length is 11-11/16 inches
(297 mm) or less. A page margin along the
short side of the paper is selected if the origi-
nal length exceeds 11-11/16 inches (297 mm).
If [Auto] is selected for the original binding po-
sition, the binding margin is set at the top or
on the left.
If the binding position for the copy is set to
[Auto], the binding position is automatically
determined according to the orientation of the
loaded original. If the original length is 11-
11/16 inches (297 mm) or less, a binding po-
sition along the long side of the paper is se-
lected. If the original length is more than 11-
11/16 inches (297 mm), a binding position
along the short side of the paper is selected.
If Output Binding Position is set to [Auto], the
binding position is set at the top or on the left.
5
5-9