Hdd Settings] - Muratec MFX-C2828 User's Manual Copy Operations

7.10 [Security Settings]
Administrator Settings
[Security Settings] / [Security Details] / [Print Data
Capture]
[Security Settings]/[Security Details]/ [Hide Person-
al Information (MIB)]
[Security Settings] / [Security Details] / [Initialize] /
[Network Settings]
[Security Settings]/[Security Details]/ [Job History
Thumbnail Display]
[Security Settings] / [Image Log Transfer Settings]
Review [Secure Document User Box]
[Network] in Web Connection / [E-mail Setting] /
[S/MIME]
[Maintenance] in Web Connection / [Reset] / [Net-
work Setting Clear]
[Security]/[Administrator Password Setting] in Web
Connection
CS Remote Care
If Enhanced Security settings is enabled, various security functions are configured to allow you to ensure
higher-level security of data management. For details, contact your service representative. To enable the en-
hanced security mode, the following settings must first be configured. Different screens appear depending
on the current settings.
7.10.6

[HDD Settings]

This setting is for the hard disk operations. For details, refer to the [User's Guide Box Operations].
Settings to forcibly changed
Set to [Restrict].
Set to [ON].
[Network Settings] is not displayed.
Set to [OFF].
Set to [OFF].
Only the list is displayed before the password au-
thentication is performed.
[Automatically Obtain Certificates] is set to [OFF].
[E-Mail Text Encrypt. Method] is set to [3DES].
[Network Setting Clear] is not displayed.
[Administrator Password Setting] is not displayed.
Restricts the device setting in the remote mode
based on CS Remote Care.
7
7-50