Stamp Settings] - Muratec MFX-C2828 User's Manual Copy Operations

7.1 [System Settings]
Factory default
[Original Glass Original
Size Detect]
[8 1/2e14/Foolscap Size
Detection]
[Foolscap Size Setting]
7.1.12

[Stamp Settings]

Configure header and footer settings to be printed.
%
Press the Utility/Counter key ö [Administrator Settings] ö [System Settings] ö [Stamp Settings].
Settings
[Header/Footer Settings]
[Fax TX Settings]
Factory default
[Fax TX Settings]
[Table 1]
[8 1/2 e 14]
[8 e 13 w]
Register or change a header and footer.
To use the header/footer function in Application Setting, a header and foot-
er must be registered in advance.
[New] Enter a registration name, and then configure de-
tailed header and footer settings.
Configure whether to print a header and footer,
and then configure print contents.
•
•
•
Configure pages and text details.
•
•
[Delete] Deletes the selected header or footer.
[Check/Edit] Change the selected header or footer.
This setting is for the fax and network fax operations.
For details, refer to the [User's Guide Network Scan/Fax/Network Fax Op-
erations].
[Cancel]
[Text]: Enter text.
[Date/Time]: Select a format to display the
date and time.
[Other]: Specify the distribution control
number. Select whether to include the Job
Number, Serial Number, and Account/User
Name.
[Pages]: Select whether to print the header
and footer on all pages or only on the first
page.
[Text Details]: Select the color, size, and type
of the text for the header and footer to be
printed.
7
7-20