Muratec MFX-C2828 User's Manual Copy Operations page 197

8.1 Paper
% When using envelopes:
Expel air from the envelopes, and then load them while holding
the folds of the envelopes.
Load them with the flap side up, as shown in the illustration.
The flap side of envelopes cannot be printed on.
% To load label sheets:
Load them in the w orientation, as shown in the illustration.
A label sheet consists of the printing surface, sticking layer,
and pasteboard. Peel off the pasteboard, then you can stick
the label to other objects.
3
Slide the Lateral Guide to fit the size of paper being loaded.
4
Select the paper type.
% To use label sheets, select [Thick 1].
% OHP transparencies can be printed only in black. Before selecting OHP transparencies, select
[Black] in the Color tab.
% If you select [4 e 6w] ([A6 Cardw]), the paper type is automatically set to [Thick 3].
d
Reference
To configure paper settings:
Press [Basic] ö [Paper].
8
8-6