10.1
Using an authentication unit (Biometric type)
13
Click [OK].
14
Disconnect the authentication unit from the USB port of the computer.
15
Turn the Main Power Switch of this machine off, connect the authentication unit to this machine, and
turn the Main Power Switch of this machine on.
NOTICE
To turn the Main Power Switch off and on, first turn the Main Power Switch off, and then turn it on
after 10 or more seconds has elapsed. Not doing so may result in an operation failure.
When connecting or disconnecting the USB cable, hold the plug. Otherwise, the machine may be dam-
aged or a failure may occur.
10
10-17