Settings To Forcibly Changed - Muratec MFX-C2828 User's Manual Copy Operations

7.10 [Security Settings]
Administrator Settings
[Security Settings] / [HDD Settings] / [HDD Encryp-
tion Setting]
[Security]/[PKI Settings]/[SSL Setting] in Web Con-
nection
• [Image Controller Setting]
• [Management Function Choice]
• [CE Password]
• [CE Authentication]
• [HDD]
All the settings above must be configured by your
service representative.

Settings to forcibly changed

When the enhanced security is enabled, the following settings are forced.
- The changed settings will not revert when the enhanced security mode is turned off.
- After the password rules have been changed, any passwords that do not comply with the changed rules
will not be authenticated. For details on the password rules, refer to page 7-46.
- For details on the network settings to be forcibly changed, refer to the [User's Guide Network
Scan/Fax/Network Fax Operations].
Administrator Settings
[System Settings] / [Restrict User Access] / [Re-
strict Access to Job Settings] / [Registering and
Changing Addresses]
[User Authentication/Account Track] / [General
Settings] / [Public User Access]
[User Authentication/Account Track] / [User Au-
thentication Settings] / [Administrative Settings] /
[User Name List]
[User Authentication/Account Track] / [Print with-
out Authentication]
[Network Settings] / [FTP Settings] /[FTP Server
Settings]
[Network Settings] / [SNMP Settings] / [SNMP
v1/v2c Settings]
[Network Settings] / [SNMP Settings] / [SNMP v3
Settings]
[Network Settings] / [TCP Socket Settings]
[Network Settings] / [WebDAV Settings] / [WebDAV
Server Settings] / [SSL Setting]
[System Connection] / [OpenAPI Settings]
[Security Settings] / [User Box Administrator Set-
ting]
[Security Settings] / [Security Details] / [Password
Rules]
[Security Settings] / [Security Details] / [Prohibited
Functions When Authentication Error]
[Security Settings] / [Security Details] / [Prohibited
Functions When Authentication Error] / [Release
Time Settings]
[Security Settings] / [Security Details] / [Confiden-
tial Document Access Method]
Required settings
Specify a HDD encryption passphrase.
• Set [Mode using SSL/TLS] to [Admin. Mode]
and [User Mode].
• Set [Encryption Strength] to [AES-256] or
[3DES-168].
These items must be configured by your service
representative. For details, contact your service
representative.
Settings to forcibly changed
Set to [Restrict].
Set to [Restrict].
Set to [OFF].
Set to [Restrict].
[FTP Server Settings] is not displayed.
[Write Setting] is set to [Invalid].
In [Write User], [Security Level] cannot be set to
[OFF].
[Use SSL/TLS] is set to [ON].
Set to [SSL Only].
Set to [SSL Only].
Set to [Restrict].
Set to [Enable].
Set to [Mode 2], and the number of tries is set to 3.
• The number of tries can be changed to 1, 2, or
3.
The allowable setting range is limited to 5 or more
minutes. This value cannot be less than 5 minutes.
Set to [Mode 2].
7
7-49