Enhanced Security Mode]; Required Settings - Muratec MFX-C2828 User's Manual Copy Operations

7.10 [Security Settings]
Settings
[Job History Thumbnail
Display]
[Secure Print Only]
[Copy Guard]
[Password Copy]
Factory default
[Password Rules]
[Prohibited Functions
When Authentication Error]
[Confidential Document
Access Method]
[Manual Destination Input]
[Print Data Capture]
[Job Log Settings]
[Restrict Fax TX]
[Hide Personal Information]
[Hide Personal Information
(MIB)]
[Display Activity Log]
[Job History Thumbnail
Display]
[Secure Print Only]
[Copy Guard]
[Password Copy]
7.10.5

[Enhanced Security Mode]

The enhanced security mode cannot be enabled when any of the current functional settings conflict with the
enhanced security mode.
When the enhanced security mode is enabled, the settings required for the mode or the settings that have
been forcibly switched when entering the mode cannot be changed.

Required settings

To enable the enhanced security mode, the following settings must have been configured.
Administrator Settings
[User Authentication/Account Track] / [General
Settings] / [User Authentication]
[Security Settings] / [Administrator Password]
Configure whether to perform thumbnail display when displaying the job
history.
This setting is for the print operations. For details, refer to the [User's Guide
Print Operations].
Specify whether to use the copy guard function.
• If [Copy Guard] is selected in [Application], you can embed copy inhibit
information on paper. You can also detect copy inhibit information em-
bedded on paper.
• This item is displayed when the optional Security Kit SC-507 is in-
stalled.
Specify whether to use the password copy function.
• If [Password Copy] is selected in [Application], you can embed a pass-
word on paper. You can also detect a password embedded on paper.
• This item is displayed when the optional Security Kit SC-507 is in-
stalled.
[Invalid]
• [Prohibit Functions When Auth. Error]: [Mode 1]
• [operation Ban release time]: 5 min.
[Mode 1]
[Allow All]
[Allow]
[No]
[OFF]
[OFF]
[ON]
[ON]
[OFF]
[No]
[No]
[No]
Required settings
Select either [ON (External Server)] or [ON (MFP)].
•
Set a password complying with password rules.
When you enable account track, select [Ac-
count Name & Password] for the account track
input method.
7
7-48