Sony PXW-X320 Operating Instructions Manual page 83

2
Launch the browser and input http://
<camcorder's IP address> (setting of
MAINTENANCE > Network Setting >
IP Address in the setup menu)/rm.html
in the address bar.
Example: When the IP address is
192.168.1.10, input http://192.168.1.10/
rm.html in the address bar.
The Wi-Fi Remote screen will appear on the
device screen when the connection is
established.
Thereafter operate the camcorder as shown
on the screen of the Wi-Fi connected device.
The REC button becomes unavailable when
the Lock switch is dragged to the right.
Notes
• To display the page for a smartphone, change the page
to "rms.html." To display the page for a tablet device,
change the page to "rmt.html." Normally, when
"rm.html" is entered, the page displayed switches
automatically for the device. However, in some cases,
a different page may be displayed, depending on the
device.
• The camcorder status may not match the Wi-Fi
Remote screen in the following cases. If this happens,
reload the browser display.
- when the camcorder is restarted while the connection
is established.
- when the camcorder is controlled directly while the
connection is established.
- when the device is reconnected.
- when you operate forward/backward on the device's
browser.
• If the Wi-Fi signal is poor, the Wi-Fi remote control
may not work properly.
• Your smartphone/tablet may not be compatible with
the ad hoc mode. For details, refer to the operating
instructions supplied with the smartphone/tablet.
Compatible devices
The following devices, using the specified
versions or higher, can be used as Wi-Fi remote
controls.
Device OS
PC Windows 7/
Windows 8
Mac OS10.8/10.9/
10.10
Smartphone Android 4.1/
4.2/4.3/4.4
iOS7.1/8.0/8.1
Browser
Chrome or Safari
Safari
Chrome
Safari
83
Device OS
Tablet Android 4.1/
4.2/4.3/4.4
iOS7.1/8.0/8.1
Browser
Chrome
Safari