Adding And Deleting Shot Marks (Udf/Exfat/Fat-Hd Mode Only); Changing Clip Index Pictures (Udf/Exfat/Fat-Hd Mode Only); Dividing Clips (Fat-Hd Mode Only) - Sony PXW-X320 Operating Instructions Manual

Example shot mark thumbnail screen
(with Shot Mark1 selected)
S1 S2
S1 S1
Clip properties are displayed at the bottom of the
screen.
Except for the following item, the information
displayed here is the same as the information
displayed in the expand thumbnail screen.
a Timecode display
This is the timecode of the selected frame in the
shot mark thumbnail screen.
Adding and Deleting Shot Marks
(UDF/exFAT/FAT-HD Mode Only)
To add shot marks
1
Select the frame where you want to add
a shot mark, and then select
"THUMBNAIL" > "Set Shot Mark" >
"Add Shot Mark1" (or "Add Shot
Mark2").
The properties screen of the selected frame
appears, and a confirmation message appears
below the image.
2
Select "Execute," and press the MENU
knob.
To delete shot marks
1
Select the frame where you want to
delete a shot mark, and then select
"THUMBNAIL" > "Set Shot Mark" >
"Delete Shot Mark1" (or "Delete Shot
Mark2").
S2 S1
The properties screen of the selected frame
appears, and a confirmation message appears
below the image.
2
Select "Execute," and press the MENU
knob.
Changing Clip Index Pictures
(UDF/exFAT/FAT-HD Mode Only)
1
Select the thumbnail of the frame that
you want to use as the index picture,
and then select "THUMBNAIL" > "Set
Index Picture."
The properties screen of the selected frame
appears, and a confirmation message appears
below the image.
2
Select "Execute," and press the MENU
knob.
Note
Even if you set the index picture to a frame that is not the
first frame of a clip, playback of that clip from a
thumbnail screen always begins at the first frame.
Dividing Clips (FAT-HD Mode
Only)
1
Select the thumbnail of the frame where
you want to divide the clip, and then
select "THUMBNAIL" > "Divide Clip."
The properties screen of the selected frame
appears, and a confirmation message appears
below the image.
2
Select "Execute," and press the MENU
knob.
The clip is divided at the selected frame, and
two clips with different names are created.
The first four characters of the clip name are
taken from the name of the original clips, and the
last four characters are new serial numbers.
Example: When the name of a newly recorded
clip would be EFGH0100, and a clip named
ABCD0002 is divided, the names of the two
newly created clips are ABCD0100 and
ABCD0101.
106