Chapter 7 : Saving And Loading User Setting Data; Saving And Loading Settings; Saving Settings Data - Sony PXW-X320 Operating Instructions Manual

7 Saving and Loading User Setting Data
Chapter
Saving and Loading
Settings
You can save setup menu settings in the
camcorder's internal memory, on an SxS memory
card, or USB flash drive (in UDF/exFAT mode).
This allows you to quickly recall an appropriate
set of menu settings for the current situation.
When using a USB flash drive (UDF, exFAT
modes)
Before starting, connect a formatted USB flash
drive (see page 65) to the external device
connector.
Setting data is saved in the following categories.
User files: User files save the setting items and
data of the customizable USER menu. You
can save up to 64 user files on an SxS
memory card or USB flash drive (in UDF,
exFAT modes). By loading this file into the
camcorder memory, you can customize the
setup of the USER menu.
ALL files: ALL files save the setting data of all
menus. You can save up to 64 ALL files on
an SxS memory card or USB flash drive (in
UDF/exFAT mode).
Note
Device specific data (shading, output levels, and
other data that requires adjustment for the specific
device) is not saved.
Scene files: Scene file save adjustments to
PAINT menu items for the purpose of
shooting a particular scene. You can save up
to five scene files in the camcorder's internal
memory and up to 64 scene files on an SxS
memory card or USB flash drive (in UDF/
exFAT mode).
Reference files: Reference files save the
reference values that are set when you
execute "FILE" > "Scene" > "Standard" in
the setup menu. You can save one reference
file in the camcorder's internal memory and
one on an SxS memory card or USB flash
drive (in UDF/exFAT mode).
Lens files: Lens files save the setting data used to
compensate for lens characteristics, such as
flare, white shading, white balance and
center markers. You can save up to 32 lens
files in the camcorder's internal memory and
up to 64 lens files on an SxS memory card or
USB flash drive (in UDF/exFAT mode).
The first settings stored in a file are called "preset
values."
Even after loading files to set up the camcorder,
and overwriting original files with new settings,
you can still recover preset values and reset files
to their initial states (see page 166).

Saving Settings Data

Before starting, insert a writable SxS memory
card into a memory card slot.
For details about menu operations, see "Basic Setup
Menu Operations" (page 110).
1
Select "FILE" > "All" in the setup
menu.
To assign a name to the data before saving
it
Assign a name before proceeding to step 2.
For details, see "To assign names to files"
(page 165).
2
Select "All Save SxS" > "Execute."
When saving to a USB flash drive (UDF,
exFAT modes), select "All Save USB" >
"Execute."
3
Press the MENU knob.
An All file list box appears.
File numbers where "No File" is displayed
are empty file numbers.
File numbers with a file name or a date and
time are the number of files that already
contain data.
164