Advanced Operations; Recording Shot Marks; Setting Ok Marks - Sony PXW-X320 Operating Instructions Manual

selected clips. For details, see "Deleting Clips"
(page 104).
1
Turn on the assignable switch to which
the Last Clip DEL function has been
assigned (see page 159).
A confirmation message appears.
2
Turn the MENU knob to select
"Execute" and press the knob.

Advanced Operations

Recording Shot Marks

On this camcorder, two types of shot marks are
available in HD mode. You can record them at
user-specified positions to make it easier for
editors to cue up those positions.
You can record up to 127 shot marks per clip.
Note
Shot marks cannot be recorded in SD mode.
You can also use the THUMBNAIL menu to add and
delete shot marks in clips. For details, see "Adding
and Deleting Shot Marks (UDF/exFAT/FAT-HD
Mode Only)" (page 106).
To record shot marks
Do one of the following.
• Turn on an assignable switch to which Shot
Mark 1 or Shot Mark 2 has been assigned (see
page 158).
• If Lens RET has been assigned to the RET
button on the lens, operate as follows.
To record shot mark 1: Press the RET button
once.
To record shot mark 2: Press the RET button
twice in quick succession.
When a shot mark is recorded, a "Shot Mark 1" or
"Shot Mark 2" indication appears in the
viewfinder for about three seconds near the
timecode indication.

Setting OK Marks

As a guide for selecting clips during editing, you
can set OK marks in clips recorded in HD mode.
Notes
• OK marks cannot be set in SD mode.
• OK marks cannot be set or deleted during recording or
playback.
To add/delete OK marks
You can also use the THUMBNAIL menu to add
and delete OK marks in previously recorded clips.
86