Sony PXW-X320 Operating Instructions Manual page 183

WARNING indicator
Problem
The DC IN voltage is too
low (stage 2).
Recording cannot be
performed.
WARNING indicator
—
Problem
You cannot use both an
i.LINK connection and
an IFU-WLM3
connection at the same
time.
WARNING indicator
—
Problem
An error was detected
with the battery pack.
WARNING indicator
—
Problem
The remaining power of
the backup battery is
insufficient.
WARNING indicator
—
Problem
A partitioned memory
card or one that contains
recorded clips exceeding
the number permitted
with this camcorder is
loaded.
Warning sound
Operation in the
recorder module
Recording stops.
Warning sound
—
Operation in the
recorder module
Recording continues.
Warning sound
—
Operation in the
recorder module
Recording stops.
Warning sound
—
Operation in the
recorder module
Recording continues.
Warning sound
—
Operation in the
recorder module
Recording continues.
183
Tally/REC
Solution
Connect other power source.
Tally/REC
—
Solution
Turn off the power, and disconnect either the
i.LINK or IFU-WLM3.
Tally/REC
—
Solution
Replace the battery pack with a normal one.
Tally/REC
—
Solution
Refer to a Sony service representative to replace
the battery with a new one.
Tally/REC
—
Solution
It cannot be used with this camcorder. Replace it
with another card.
Battery remaining
Battery remaining
—
Battery remaining
—
Battery remaining
—
Battery remaining
—