Using Wireless Lan Connection; Connecting The Ifu-Wlm3; Making A Wireless Lan Connection - Sony PXW-X320 Operating Instructions Manual

Using Wireless LAN
Connection
Connecting an optional IFU-WLM3 USB
Wireless LAN Module to this camcorder allows a
wireless LAN connection between a computer
and the camcorder.
Making a wireless LAN connection between a
computer and the camcorder enables you to do the
following.
• You can transfer planning metadata and other
files between a computer and this camcorder.
• You can also use the Live Logging function to
add shot marks to the video currently being
shot.
Note
Check the firmware version of your camcorder to make
sure that the camcorder supports the wireless LAN
connection.
For details, contact a Sony sales or service
representative.

Connecting the IFU-WLM3

Open the cover of the external device connector,
then connect the IFU-WLM3.
Notes
• The IFU-WLM3 USB Wireless LAN Module (sold
separately) may not be available in some countries/
regions.
• Attach/remove the IFU-WLM3 after the camcorder is
turned off.
• An i.LINK connection and USB wireless LAN module
cannot be used at the same time.
When using a wireless connection with an IFU-
WLM3 inserted directly into the external device
connector, do not connect a device to the i.LINK
connector.
• If you use a wireless device near the camcorder, the
camcorder may not work correctly. Turn any wireless
devices off that are near the camcorder.
Making a Wireless LAN
Connection
Two types of wireless LAN connections are
available. In "ad-hoc mode", you can make a
peer-to-peer connection between a computer and
camcorder. In "infrastructure mode", you can
make connections between a computer and
multiple camcorders via a wireless LAN access
point (building a LAN).
To make a network setting
Change settings under "MAINTENANCE" >
"Network Setting" in the setup menu as required.
Item
DHCP
IP Address
Subnet Mask
Default Gateway Default gateway (factory
User Name
Password
a) The IP address determined by DHCP server is
displayed here.
When you have changed a setting
Set the "Set" item to "Execute." When a
confirmation message appears, turn the MENU
knob to select "Execute" and press the knob.
To make a connection in ad hoc mode
1
Configure network connection settings
on the computer to be connected to the
camcorder.
2
Start a connection on the computer.
3
Set "MAINTENANCE" > "Wi-Fi
Setting" > "Wi-Fi" to "Enable" in the
setup menu.
4
Set "MAINTENANCE" > "Wi-Fi
Setting" > "Scan Networks" to
"Execute" and press the MENU knob.
79
Setting
Setting that specifies whether to
acquire the IP address
automatically from a DHCP
server.
Enabled: Acquire
automatically.
Disabled: Do not acquire
automatically (factory
default setting).
a)
IP address (factory default
setting: 192.168.1.10)
Subnet mask (factory default
setting: 255.255.255.0)
default setting: 0.0.0.0)
User name for log-in (factory
default setting: admin)
Password for log-in (factory
default setting: model name
"pxw-x320")