Checking The Electrical Connections; M 8. Cleaning The Burner - Viessmann VITOFLAME 200 Service Instructions Manual

Implementation
I
nspection
(cont.)
M

7. Checking the electrical connections

aint.
Check the plug−connections on the
burner components and the cable
bushes for tight fit.
M
8. Cleaning the burner
aint.
1. Burner in the maintenance
position.
2. Clean the housing and the flame
tube, sensor plate A, ignition
electrodes B, flame monitor C
and impeller D.
Initial start−up, inspection and maintenance
Cleaning the combustion
chamber and hot gas flues,
see service instructions.
9