3. Answering Calls - Avaya IP Office 1408 User Manual

3. Answering Calls

A slow flashing green lamp on an
ringing and by the message lamp flashing.
141
Selected Button
If the button also has a red lamp (
handset or go off hook in any other way. If that in the case you can answer the call in the following ways:
To answer a call on the selected button:
1. Select the method which you want to use to talk to the caller:
· To silence the ringing, press the >> double-arrow soft key and then press the Ignore soft key. The call will
still continue alerting visually and can be answered or ignored.
· To redirect the call to voicemail, press the >> double-arrow soft key and then press the To VM soft key.
· To answer the call using the handset, lift the handset.
· To answer the call handsfree, press the
· To answer the call on a headset, press the
· Just pressing the
path setting.
69
2. The green lamp will stop its slow flash. Once you have answered the call, you can switch between talk modes:
· To switch to using the handset, lift the handset.
· To switch to handsfree, press the
it.
· To switch to headset mode, press the
replace it.
· If you have answered the call on the speaker or headset, pressing the SPEAKER or HEADSET key again
before you select another mode will end the call.
· Just pressing the
Answering Another Call
If the button that with a slow green flash does not have a red light, it is not the currently selected button. That may be
because you are already on a call on another button. If that is the case, answering the new call will automatically put the
existing call on hold. [1]
1. Using the up and down
· To silence the ringing, press the >> double-arrow soft key and then press the Ignore soft key. The call will
still continue alerting and can be answered or ignored.
· To redirect the call to voicemail, press the >> double-arrow soft key and then press the To VM soft key.
2. Press the flashing green appearance button
will be answered using which ever talk mode you were already using for the existing call.
Notes
1. This guide assumed that auto hold is enabled (the default). The system administrator can disable auto hold for the
system, in which case calls are automatically disconnected rather than held.
1408/1416 Phone User Guide
IP Office™ Platform 9.1
appearance button indicates an alerting call. This may also be accompanied by
) that indicates that it is already the selected button that will be used if you lift the
= Red on, Slow green flash.
SPEAKER key.
HEADSET key.
key will answer the call either on the speaker or headset depending on the phones
SPEAKER key. If you were using the handset you can now safely replace
HEADSET key. If you were using the handset you can now safely
key or any other appearance button will put the call on hold.
arrow keys, you can scroll the display to see details of the waiting call.
to answer the new call and put the existing call on hold. The call
Comments on this document? infodev@avaya.com
15-601040 Issue 09i (07 August 2015)
audio
Page 40