Checking The Time Settings; Setting The Date - Avaya IP Office 1408 User Manual

20.2 Checking the Time Settings

When the phone system is configured to get the time automatically from a time server, you can view the settings through
the phone. The details include the address of the time server, the UTC time value obtained and the current local time. If
daylight saving time (DST) is being used, the DST setting being applied is also shown.
· Time Display Format
The time format (12 or 24-hour) is controlled by the telephone system. It can be set to either 12-hour or 24-hour
format for all phones by the system administrator.
1. Press the Features soft key if shown.
· To access the menu during a call, press the
the Features soft key.
2. Use the up and down
3. Press the Select soft key or the OK button or the
4. Use the up and down
present then you may not have been configured as a system phone user by your system administrator.
5. Press the Select soft key.
6. Enter your security code (this is the same as your login code) and press the Done soft key.
7. Use the up and down arrow keys to scroll the display to the option Time Server Status.
8. Press the Select soft key or the OK button or the
system is displayed.
9. Use the up and down

20.3 Setting the Date

The process below can be used when the telephone system does not obtain the time and date automatically. On systems
that are configured to obtain the time automatically, the current
1. Press the Features soft key if shown.
· To access the menu during a call, press the
the Features soft key.
2. Use the up and down
3. Press the Select soft key or the OK button or the
4. Use the up and down
present then you may not have been configured as a system phone user by your system administrator.
5. Press the Select soft key.
6. Enter your security code (this is the same as your login code) and press the Done soft key.
7. Use the up and down arrow keys to scroll the display to the option Date.
8. Press the Select soft key or the OK button or the
system is displayed.
9. Enter the required date, using the either the * or # keys to enter the / separators. To delete the previous digit or
character entered press the
10.When a complete valid date has been entered, the display will confirm that by showing the full date and the Done
soft key option.
11.To set the date as the new date to be used by the telephone system press the Done soft key.
1408/1416 Phone User Guide
IP Office™ Platform 9.1
System Administration: Checking the System and Software Version
right arrow key or press the
arrow keys to scroll the display to the option Phone User.
right arrow key.
arrow keys to scroll the display to the option System Admin. If the option is not
right arrow key. The current date being used by the telephone
arrow keys to scroll through the details.
right arrow key or press the
arrow keys to scroll the display to the option Phone User.
right arrow key.
arrow keys to scroll the display to the option System Admin. If the option is not
right arrow key. The current date being used by the telephone
left arrow key.
Comments on this document? infodev@avaya.com
time server settings can be displayed.
169
15-601040 Issue 09i (07 August 2015)
PHONE key and then press
PHONE key and then press
Page 169