Cable Adapter Module
This section describes how to set up and use the snap-on CAM with the mobile computer. The CAM
snaps on to the bottom of the mobile computer and can be easily removed when not in use.
Communications Port
When attached to the mobile computer, the CAM can perform the following functions.
• Provides power for operating the mobile computer, with the appropriate power connection.
• Provides serial connection through the serial pass-through port for communication with a
serial device, such as a host computer. For communication setup procedures, see
Communication Setup on page
• Provides USB connection through the USB pass-through port for communication with a USB
device, such as a host computer. For communication setup procedures, see
Communication Setup on page
• Charges the mobile computer's battery, when used with the appropriate power supply.
Latches
Figure 12-29. Cable Adapter Module
4-9.
4-9.
Accessories
Pogo Pin Pass-through
Connector
Latch Grip
Power Port
Serial
12-39
Serial