Symbol MC9000-K/S Reference Manual page 400

10-4 MC9000-G with Windows
Text Box/Button
Please scan all of the bar codes... This text box displays the status of a scanned bar code.
Bar codes left to scan...
About
Reset
Exit
®
Mobile 2003 Software for Pocket PCs PRG
Table 10-1. Rapid Deployment Window
Waiting - indicates the mobile computer is ready to scan a bar code.
OK - indicates the mobile computer successfully scanned a bar code. (The
Indicator LED bar on the mobile computer turns green and a beep sounds).
If there are no bar codes left to scan, the Rapid Deployment Configuring window
displays (see Figure
This text box displays a list of any remaining bar codes to scan (1-D bar codes
only). When all required bar codes are scanned successfully, the Rapid
Deployment Configuring window displays (see
Tap About to display the Rapid Deployment Client Info window.
Tap Reset to remove any previously scanned data.
Tap Exit to close the application. A confirmation window displays:
Note: If the application is closed prior to scanning all required bar codes, any
scanned data collected up to that point is lost.
Description
10-3).
Figure 10-3).