Battery Charging Indicators - Symbol MC9000-K/S Reference Manual

Battery Charging Indicators

To charge a spare battery using the UBC adapter, connect the power supply to the UBC (see
12-35 on page 12-44), then insert the spare battery. The spare battery begins charging automatically.
The UBC's charge LEDs (see
Table 12-5 shows battery charging status indications.
The battery usually charges in three hours.
Table 12-5. UBC Adapter Charge LED Status Indications
LED Indication
POWER Green
READY or Green
STANDBY or Flashing-
Yellow
FAULT Yellow
CHARGING Yellow
Figure 12-36)) show the status of the battery charging in the adapter.
POWER
READY or STANDBY or FAULT
(Green) (Flashing Yellow)
CHARGING
(Solid Yellow)
Figure 12-36. UBC Adapter LEDs
Power is connected to the UBC Adapter.
Charging complete.
The battery was deeply discharged and is being trickle charged to bring the voltage up
to the operating level. After operating level voltage is achieved the battery charges
normally.
Charging error, check placement of mobile computer/spare battery.
Normal charge.
(Solid Yellow)
Description
12-45
Accessories
Figure