Band - Symbol MC9000-K/S Reference Manual

b. Select an OFF radio button to turn off the radio when the mobile computer suspends,
regardless of the radio power state prior to the mobile computer suspend. For example,
if the radio is on and the user presses the Power key to suspend the mobile computer,
the radio turns off. When the mobile computer resumes, the radio turns on.
3. Tap ok to exit settings.

Band

The Band tab appears only when MC46 configuration is installed on the
mobile computer. Both the 850 MHz Enabled and Handover Enhancement
Enabled check boxes are checked (enabled) by default. Any changes made in
this window do NOT persist after a cold boot (default settings are restored).
Changes do persist after a warm boot.
1. Tap Start - Settings - Personal tab - Phone icon - Band tab.
or
Start - Phone - Tools - Options - Band tab.
2. Select the 850 MHz Enabled check box to enable the radio to handover in the band of
850MHz (in addition to PCS1900MHz/DCS1800MHz).
3. Disable Handover Enhancement only for some special networks outside of the United States
and Europe.
4. Tap ok to exit settings.
Figure 6-27. Phone Window - Band Tab
Wireless WAN - GSM/GPRS
6-25