Symbol MC9000-K/S Reference Manual page 236

4-20 MC9000-K/S with Windows
6. Use the Port Settings tab to modify the USB port settings of the cradle.
Figure 4-17. Cradle Settings Window - Port Settings Tab
Field
Port Name
IP Address
Use DHCP to obtain IP Address check
box
Use NAT check box
7. Click OK.
®
Mobile 2003 Software for Pocket PCs PRG
Table 4-3. Cradle Settings - Port Settings Fields
A text string used to describe the device attached to the port. Any 15-character
string can be entered.
You can specify up to four port names, one for each of the cradle's slots.
The IP address assigned to the cradled device. There should be one IP address
per cradle slot. This box is disabled for all devices if DHCP is used to obtain the
IP address.
The cradle uses DHCP to obtain an IP address for the handheld.
Unchecking this selection allows the cradle to use Static IP address for the
handheld.
The cradle uses Network Address Translation (NAT) when forwarding handheld
traffic onto the network. No IP addresses are necessary for the handhelds.
This must be disable when using ActiveSync.
Description