Symbol MC9000-K/S Reference Manual page 544

14-26 MC9000-K/S with Windows
Error Text
Can't open the source
Can't open the destination
Can't read from the source device
Can't write to the destination
device
Transmission checksum error
Readback checksum error
There is no more heap space
available
Insufficient data available to
complete record
Invalid Symbol HEX file
Unrecognized or unsupported HEX
record
®
Mobile 2003 Software for Pocket PCs PRGe
Table 14-4. IPL Errors (Continued)
Error Number
-7
-8
-9
-10
-11
-12
-14
-21
-23
-24
Probable Cause
An error occurred opening the source device (either
radio card or Serial port). Check source device
connectivity and retry.
An error occurred opening the destination device
(either flash ROM or Power Micro). Retry the
download. If the failure persists, it is most likely due
to a hardware failure; the mobile computer requires
servicing.
The source device (either radio card or Serial port)
could not be read from. Check source device
connectivity and retry.
The destination device (either flash ROM or Power
Micro) could not be written to. Retry the download. If
the failure persists, it is most likely due to a hardware
failure; the mobile computer requires servicing.
An error occurred during transmission from the source
device (either radio card or Serial port) and the
checksum check failed. Check source device
connectivity and retry.
A checksum, generated from reading back data that
was written to the destination device, was incorrect.
An error during transmission or a write error to the
destination device could cause this.
There is no more heap space available for the
download procedure. Restart IPL and retry the
download. If the failure persists, contact service with
details of what is being downloaded.
A Symbol HEX file download was attempted but the
HEX file is invalid. Ensure the file is in Symbol HEX file
format.
A Symbol HEX file download was attempted but the
HEX file is invalid. Ensure the file is in Symbol HEX file
format.
The Symbol HEX file being downloaded contains an
invalid or unrecognized HEX record. Ensure the file is
in proper Symbol HEX file format.