Configuring The Network Type; Configuring Avalanche Settings - Intermec PM4i User Manual

PM4i Mid-Range Printer User's Manual
Understanding the TCP/IP Settings (continued)
Setting
Name Resolution
Printer Service

Configuring the Network Type

Use the Network Type page to choose whether you are using an
Ethernet or wireless 802.11 network.
To configure the network type
1 Click Network Admin > Network Type.
2 Select either Ethernet or Wireless 802.11.
3 Click Submit new settings.
4 Reboot the printer for the changes to take effect.
Note: Once you change the network type to Wireless 802.11, you
cannot communicate with the printer using Ethernet. You need to
change the command through the Setup menu or send a command
through a serial connection.

Configuring Avalanche Settings

Use the Avalanche page to view and change Wavelink Avalanche
settings.
To configure Avalanche settings
1 Click Network Admin > Avalanche.
2 View or update your settings.
Chapter 3 — Configuring the Printer
Description
DNS Server: The IP address of the name server.
DNSv6 Server: The IP address of the name server for
IPv6.
WINS Server (Primary and Secondary): The IP
addresses of the primary and secondary WINS servers.
If you chose DHCP or BOOTP for the configuration
method, you may see the currently assigned WINS IP
addresses depending on the configuration of your
DHCP server.
NET1 TCP Port Number: The port number for raw
TCP. The default is 9100.
NET1 Queuing: Determines whether queuing for the
TCP port is turned on, off, or enabled for multiple
network connections (Multi).
73