Table of Contents
Advertisement
SYSTEM CONFIGURATION MENU
This menu adjusts general printer settings to suit the way you prefer
to work.
SYSTEM CONFIGURATION MENU
Items
POW SAVE TIME
PERSONALITY
USB PS PROTOCOL RAW
NET PS PROTOCOL
CLEARABLE
WARNING
AUTO CONTINUE
MANUAL TIMEOUT
WAIT TIMEOUT
LOW TONER
Settings
5
15
30
60
240
AUTO
PCL
IBM PPR III XL
EPSON FX
PS3 EMULATION
ASCII
RAW
ASCII
ON
JOB
ON
OFF
OFF
30
60
5~40~300
CONTINUE
STOP
MENU FUNCTIONS > 77
Explanation
Adjusts the idling time before the printer
automatically switches into power saving
mode. In this mode power consumption is
reduced to a low level required to just keep
the printer operating and ready to receive
data. When a job is sent the printer will
require a warm-up time of up to 1 minute
before printing can begin.
This item selects which industry standard
emulation your printer should use. When
set to AUTO, incoming data is examined and
the correct emulation is automatically
selected each time a print job is received.
Selects PostScript data format for USB port.
Selects PostScript data format for network
port.
When ON, non-critical warnings, such as
requests for a different paper size, can be
cleared by pressing the ON LINE button.
When set to JOB, they are cleared when the
print job resumes.
Determines whether or not the printer will
automatically recover from a memory
overflow condition.
Specifies how many seconds the printer will
wait for paper to be fed before cancelling
the job.
Specifies how many seconds the printer will
wait when received data pauses before
forcing a page eject. In PostScript Emulation
mode the job will be cancelled if timeout
occurs.
Specifies whether the printer should
continue printing even after a low toner
condition is detected.
Advertisement
Table of Contents
