4.
In the Define Overlays window,
enter a suitable name (2) for this
overlay and choose which
page(s) (3) of your documents
will use this overlay.
5.
Enter the name of the overlay
file (4) exactly as it appeared in
the Storage Device Manager
project window. Remember that
this name is case sensitive.
If you forgot to note the overlay names when you created them,
you can find them using Storage Device Manager to view the
project file, or the printer's Information Menu to print a file list
and identify them from there.
6.
Click Add (5) to add this overlay into the defined overlays list.
7.
Click OK to close the Define Overlay window.
The new overlay now appears in the Defined Overlays list in the
printer properties window.
8.
Repeat the above procedure if you wish to define more
overlays.
9.
When done, click OK to close the printer properties window.
Your new overlays are now ready and available to be used for any
future documents you wish.
OVERLAYS AND MACROS > 90
2
3
4
5