Table of Contents
Advertisement
PCL Emulation
When you click the Properties button from your application's Print
dialogue, the driver window opens to allow you to specify your
printing preferences for this document.
1.
Paper size should be
the same as the page
size of your document
(unless you wish to
scale the printout to fit
another size), and
should also be the
same as the size of
paper you will feed
into the printer.
2.
You can choose the
source of the paper to
feed, which may be Tray 1 (the standard paper tray), Tray 2 (if
you have the optional 2nd paper tray installed) or the multi-
purpose feeder. You can also click on the appropriate part of
the screen graphic to select your preferred tray.
3.
A variety of document finishing options can be selected, such
as normal one page per sheet, or N-up (where N can be any
number up to 16) for printing scaled down pages at more than
one page per sheet. Booklet printing prints two pages per
sheet on each side of the paper so that when folded they make
up a booklet. Booklet printing requires the duplex unit to be
installed in your printer.
Poster printing will print large pages as tiles spread over
multiple sheets.
4.
For two-sided printing, you can choose to flip the page by the
long edge or the short edge. Of course, this requires that a
duplex unit be installed in your printer.
5.
If you have changed some printing preferences before and
saved them as a set, you can recall them to avoid having to set
them individually each time you need them.
6.
A single on-screen button restores the default settings.
1
2
3
4
5
WINDOWS 9X/ME DIFFERENCES > 34
6
Advertisement
Table of Contents
