Table of Contents
Advertisement
REAR VIEW
This view shows the connection panel, the rear output stacker and the
location of the optional duplex (two-sided printing) unit.
9
8
7
5
5. ON/OFF switch.
6. AC power socket.
7. Parallel data interface.
8. USB interface.
* The Network Interface has a protective "plug" which must be removed before
connection can be made.
When the rear paper stacker is folded down paper exits the printer
through the rear of the printer and is stacked here face up. This is
mainly used for heavy print media. When used in conjunction with the
multi purpose feed tray, the paper path through the printer is
essentially straight. This avoids bending the paper around curves in
the paper path and enables feeding of up to 203g/m² media.
6
9. Network interface.*
10. Location of optional duplex unit.
11. Rear, face up, 100 sheet stacker.
INTRODUCTION > 11
11
10
Advertisement
Table of Contents
