Table of Contents
Advertisement
3.
Load letter headed paper face down and top edge towards the
front of the printer, as shown.
4.
Adjust the rear stopper (1) and paper guides (2) to the size of
paper being used.
To prevent paper jams:
>
Do not leave space between the paper and the guides
and rear stopper.
>
Do not overfill the paper tray. Capacity depends on the
type of paper stock.
>
Do not load damaged paper.
>
Do not load paper of different sizes or types at the same
time.
>
Do not pull the paper tray out during printing (except as
described below for the 2nd tray).
>
Close the paper tray gently.
5.
If you have two trays and you are printing from the 1st (upper)
tray, you can pull out the 2nd (lower) tray during printing to
reload it. However, if printing from the 2nd (lower) tray, do not
pull out the 1st (upper) tray. This will cause a paper jam.
1
2
LOADING PAPER > 17
Advertisement
Table of Contents
