Table of Contents
Advertisement
15.
When the printer is ready, print a menu map as follows:
(a)
Press the + button to access the Information Menu.
(b)
Press ENTER once for the menu map.
(c)
Press ENTER again to print the menu map.
(d)
When the menu map is printed, press ON LINE to exit the
menu system.
16.
Examine the first page of the menu map.
Near the top of the page, between the two horizontal lines, you
will see the current printer configuration. This should now
indicate that the hard disk unit is installed.
All that remains is to configure the Windows printer driver so that it
knows the hard disk unit has been fitted, and the additional features
can be made available immediately.
INSTALLING UPGRADES > 123
Advertisement
Table of Contents
