Stackable NWay Ethernet Switch User's Guide
After filling in the fields above, press START to initiate the Ping
test.
The fields you can set are:
♦ Destination IP Address The IP address of the device to be
Pinged.
♦ Repetition
Ping (1-255). If zero is chosen, the Switch will continue
Pinging indefinitely.
In the lower part of the Ping Test screen, you can view the
Ping
status,
Unreachable.
110
Figure 6-38. Ping Test screen
Amount of times the Switch should send the
including
Result,
Reply,
Time
Using the Console Interface
out,
and