Sample Configuration File; Commands - D-Link DES-3624 Series User Manual

C
ONFIGURATION
This appendix provides a sample configuration file that can be
used with the Update Firmware and Configuration Files
screen in the console program.
The configuration file is a simple text file that you create. It has
two functions: to point to the location of a file on a TFTP
server, and to set the IP address, subnet mask and default
gateway for the Switch. The file being uploaded can be either
new runtime switching software, or a switch settings file which
was previously saved on the TFTP server using the Save
Settings to TFTP Server screen on the System Utilities
menu. The IP address settings defined in the configuration file
will override all other IP settings, even those defined in the
settings file being uploaded. This enables the settings from one
switch to be uploaded to another switch without their IP
settings being the same (and thus coming into conflict).

Commands:

♦
Code_type
file you wish to upload to the Switch. Possible Code_types
are PROM , RUNTIME
first setting.
196
Stackable NWay Ethernet Switch User's Guide
– This command tells the Switch the type of
, or CONFIG
10 S
AMPLE
. This should always be the

Sample Configuration File

C
F
ILE