Stackable NWay Ethernet Switch User's Guide
STP Custom Settings
To change the parameters on individual ports:
1. Choose Configure Spanning Tree Protocol from the
System Configuration menu.
2. Choose STP Custom Settings from the Configure
Spanning Tree Protocol menu. The following screen
appears:
Figure 6-18. STP Custom Settings screen
Items in the above window are described as follows:
♦ STP State Sets the Spanning Tree Protocol on a
particular port to Enabled or Disabled.
♦ Cost Defines the cost for the connection.
♦ Priority Port Priority is a read-write object that can be
set from 0 to 255. This is the priority number of the
84
Using the Console Interface