Test; Ping Test; Diagnostic Test - D-Link DSL-G604T User Manual

Wireless adslrouter

Hide thumbs Also See for DSL-G604T:

Table of Contents

DSL-G604T Wireless ADSL Router User's Guide

Test

The Test menus are used to test connectivity of the Router. A Ping test may be done through the local or external

interface to test connectivity to known IP addresses. The diagnostics feature executes a series of test of your

system software and hardware connections. Use this Test menu when working with your ISP to troubleshoot

problems.

Ping and Diagnostics Test Menu

Type the IP address you want to Ping and click on the Ping button. The results will appear below.

Select the Virtual Circuit and click the Submit button. A message will appear informing you if the loop test

succeeded or failed.

The diagnostics utility will run a series of test to check whether the device's connections are up and working.

This takes only a few seconds. The program reports whether the test passed or failed. A test may be skipped if

the program determines that no suitable interface is configured on which to run the test.

Table of Contents