Stackable NWay Ethernet Switch User's Guide
Figure 6-33. Default port VLAN assignment screen
This screen allows you to set a Default port VLAN ID number
(Vid) for each port. Press CTRL+S to let the changes take effect.
Note: If a port is a member of a trunk group but is not
the anchor, the items shown in the above table will
be read-only and the values will be the same as
those for the anchor port.
Choose Configure Static VLAN Entry to access the third item
on the IEEE 802.1Q VLANs Configuration menu. The
following screen appears:
104
Using the Console Interface