Stackable NWay Ethernet Switch User's Guide
Configure Console
You can use the Console Options screen to choose whether to
use the Switch's RS-232C serial port for console management
or for out-of-band TCP/IP communications using SLIP, and to
set the bit rate used for SLIP communications. Note that the
DES-3624i has an RS-232C serial port but the DES-3624 does
not.
Choose Configure Console to access the last item on the
System Configuration menu. The following screen appears:
Figure 6-9. Console Options screen
The following fields can be set:
Settings on Restart:
♦ Console Timeout
This setting for the restart of the
console is 15 mins, 30 mins, 45 mins, 60 mins, or Never.
Using the Console Interface
67