Configure Switch Stack - D-Link DES-3624 Series User Manual

Stackable NWay Ethernet Switch User's Guide
♦ Serial Port Determines whether the serial port should
be used for out-of-band (SLIP) management or for console
management, starting from the next time the Switch is
restarted. In this field, you can toggle between SLIP or
console port type settings.
♦ Baud Rate Determines the serial port bit rate that will
be used the next time the Switch is restarted. Applies
only when the serial port is being used for out-of-band
(SLIP) management; it does not apply when the port is
used for the console port. Available speeds are 2400,
9600, 19,200 and 38,400 bits per second. The default
setting in this Switch version is 9600.
The top of the screen displays the current settings for
Console Timeout and Serial Port as well as the Baud
Rate, Character Size, and Stop Bit for Out of Band and
Console settings, respectively.

Configure Switch Stack

The Switch Stack Configuration screen shows various pieces
of information about your Switch, and allows you to set the
System Name, System Location, and System Contact. These
settings can be retrieved from the Switch using SNMP requests,
allowing these settings to be used for network management
purposes.
Choose Configure Switch Stack to access the second item on
the System Configuration menu. The following screen
appears:
68 Using the Console Interface