Stackable NWay Ethernet Switch User's Guide
file is located. This entry is used only if the Firmware
Update is set to Enabled.
♦ Firmware Update Determines whether or not the Switch
will try to look for a runtime image file on the TFTP
server.
♦ File Name
runtime image file on your TFTP server to be uploaded to
the Switch.
♦ Use Config File Toggle to Enabled to use the settings in
a configuration text file when the switch is reset
(rebooted). The configuration file is explained in detail in
the Sample Configuration File Appendix.
♦ Config File Name The complete path and filename on
the TFTP server for the configuration file to use.
Last TFTP Server Address is a read-only field that displays
the IP address of the last TFTP server to be accessed.
Special Note Concerning Firmware Updates
1. Never download new firmware through a trunked port.
Doing so may result in a failed download, broadcast
storm, or other network problems.
2. Avoid changing active links and do not make new loops
on the network when downloading new firmware.
3. Downloading new firmware may result in the loss of
some or all Switch settings. We therefore strongly
recommend performing a factory reset and then
restarting the Switch after a successful firmware
download.
108
The complete path and filename of the
Using the Console Interface