Stackable NWay Ethernet Switch User's Guide
Console
Figure 7-32. Configure Console window
This window allows you to choose the refresh rate in the
Console Timeout field (15 minutes, 30 minutes, 45
minutes, 60 minutes or Never). Select the protocol for
communicating through the console port, Console or SLIP,
in the Serial Port field. Use SLIP for out-of-band
management. If SLIP is being used, you may also set the
Baud Rate in the last field. Click Apply and then reboot
the Switch for console port settings to take effect.
The default serial port settings are:
♦ Baud Rate=9600
♦ Data Bits=8
♦ Flow Control=X on/X off
Web-Based Network Management
169