Checking The Timing - PEUGEOT Kisbee Workshop Manual

POWER UNIT
- Install a new paper gasket.
- Install the chain tensioner and the
2 attachment screws (2).
Tightening torque: 10 Nm.
- Install the spring (3).
- Fit the chain tensioner gasket (5).
Check the condition of the O-ring and
change it if necessary.
- Install the tensioner cap (4).
Tightening torque: 8 Nm.

Checking the timing

- Rotate the engine twice: 2 revolutions in the
engine's operating direction.
- Rotate the flywheel magneto (1) to bring the
"T" mark in front of the crankcase boss (A).
- Make sure the mark (B) of the camshaft
gear is aligned with the mark (C) of the
cylinder head.
If the marks are not alined, reset the
valve timing.
70
Reproduction or translation, even partial, is forbidden without the written consent of Peugeot Motocycles
5
2
A
C
B
4
2
3
1