Removal Of The Front Top Shield Panel; Removal Of The Rear Shield Panel; Checking/Replacing Clutch Lining Assembly - PEUGEOT SpeedFight 3 Workshop Manual

BODY PANELS

Removal of the front top shield panel

Procedure 4.
- Remove the front top cover panel.
- 3 plastic screws.
- Remove the front upper shield panel.
• 4 plastic screws.
- Disconnect the lighting.

Removal of the rear shield panel

Procedure 5.
- Remove the handlebar fairings. See:
Procedure 3 page 21.
- Remove the front upper shield panel. See:
Procedure 4 page 22.
- Remove the rear shield panel.
• 4 washer head screws Ø6 mm (A).
• 1 screw Ø6 mm (B).
22
Reproduction or translation, even partial, is forbidden without the written consent of Peugeot Motocycles
A
A
B