- Disconnect the oil vapour return pipe (3).
- Disconnect the pipe from the pulsair reed
valve (4).
- Remove the 2 screws that secure the pulsair
pipe (5).
Tightening torque: 10 Nm.
- Remove the cylinder head cover and its O-
ring (4 screw).
Tightening torque: 10 Nm.
The O-ring must be changed every time
it is removed.
- Rotate the engine manually in the direction
of operation in order to bring the rocker pads
over the cam lobes (B).
- Remove the rubber plug (6).
Reproduction or translation, even partial, is forbidden without the written consent of Peugeot Motocycles
3
5
B
POWER UNIT
4
6
65