Rear Brake Linings - PEUGEOT Kisbee Workshop Manual

SERVICE OPERATIONS

Rear brake linings

Check
- Actuate the brake control lever and check
the position of the wear mark on the cam
tierod (A) compared to the mark (B) on the
engine housing.
- If the cam tierod mark is lined up with or
passes the wear mark on the engine
housing, the brake lining must be replaced.
Disassembly
- Remove the 2 screws that secure the
muffler.
Tightening torque: 15-18 Nm.
Use a new exhaust gasket.
- Remove the 2 screws fastening the
mudguard.
- Remove the 2 screws from the exhaust.
Tightening torque: 20-25 Nm.
- Remove the exhaust.
38
Reproduction or translation, even partial, is forbidden without the written consent of Peugeot Motocycles
A
B