Setting The Timing - PEUGEOT Kisbee Workshop Manual

Setting the timing

- Rotate the flywheel magneto (1) to bring the
"T" mark in front of the crankcase boss (A).
- Fit the timing chain on the camshaft gear.
- Install the camshaft gear.
- Make sure the mark (B) of the camshaft
gear is aligned with the mark (C) of the
cylinder head.
- If necessary, dislodge the gear from the
camshaft without removing it and move the
chain around the gear on the required side.
- Fit the 2 screws.
- Immobilise the magnetic wheel using a
wrench and tighten the camshaft pinion.
Tightening torque: 10 Nm.
Reproduction or translation, even partial, is forbidden without the written consent of Peugeot Motocycles
A
C
B
POWER UNIT
1
69