Power Unit; Removal Of The Power Unit - PEUGEOT Kisbee Workshop Manual

POWER UNIT

Removal of the power unit

Note: To remove the cylinder head, remove
the power propulsion unit.
- Disconnect the battery.
- Remove the rear cover assembly. See:
Procedure 2. page 20.
- Remove the RH and LH under body panel.
See: Procedure 5. page 22.
- Disconnect:
• The magneto (3 Connectors) (1).
• The choke (2).
• The carburettor heater (3).
• The suppressor (4).
• Starter power supply wires.
A.The power wire (5).
B.Starter earth wire.
• The transmission sensor (6).
- Disconnect:
• The throttle control (7).
• The fuel inlet pipe (8).
• The vacuum pressure hose (9).
Reproduction or translation, even partial, is forbidden without the written consent of Peugeot Motocycles
5
4
8
7
POWER UNIT
1
2
6
3
9
63