Check And Change Coolant; Checking The Coolant Level - PEUGEOT Elystar ADV 4 Owner's Manual

maxi
mini
A
(Frequency : see maintenance booklet)
the bottom of the container (expansion vessel),
the rim (to the bottom of the screw thread)
!
Never remove the plug from the expansion
vessel when the engine is hot. The pressurised
coolant might be projected and could cause
serious burns.
It is essential that the used coolant be
deposited at a recycling point.
Do not use the vehicle :
minimum level
coolant
In all cases, you will cause irreversible damage
to your vehicle.
Contact a Peugeot dealer for maintenance and
repair.
Checking the level of coolant is carried out with
the engine cold and at a standstill.
- To top up :
ground
protection cover
minimum level
making sure that there is always a summer and
winter protection
B
10

Checking the coolant level

- Minimum level. : the coolant is visible at
- Maximum level. : fill the container up to
Danger
Warning
- If the coolant level is lower than the
- If there is a leak
- In the event of high consumption of
- Put the vehicle onto its central stand on level
- Using a flat screw driver, remove the
A
- Loosen the plug on the expansion vessel
- The coolant level must always be above the
- If necessary, top up with a similar coolant,
- Retighten the plug of the expansion vessel
- Replace the protection cover
Elystar ADV 4
!
B
Temps