Removal Of The Spark Plug; Replacing The Air Filter - PEUGEOT Kisbee Workshop Manual

SERVICE OPERATIONS

Removal of the spark plug

- Remove the rear storage compartment.
See: Procedure 1. page 20.
- Disconnect the suppressor (1).
- Remove the spark plug access hatch (A).
- Remove the spark plug.
Essential precautions: When re-installing,
srew in the spark plug (a few turns)
by hand.
- Tighten the spark plug.
Tightening torque: 18 Nm.

Replacing the air filter

- Remove the 6 screws from the air filter
cover.
28
Reproduction or translation, even partial, is forbidden without the written consent of Peugeot Motocycles
1
A