CHECKING THE ENGINE OIL LEVEL
FR
Too much oil will noticeably restrict the
vehicle's performance.
GB
DE
IT
ES
• Place the vehicle on its central stand on flat ground.
NL
• Remove the engine's oil filler cap/gauge.
• Wipe the cap/gauge and reinsert it into the filling
orifice without screwing it up.
• Remove the filler cap/gauge and check the oil level.
GR
• The oil level shall not be between the minimum (A) and
maximum (B) level marks without exceeding the latter.
• Add oil if necessary.
SE
PT
FI
DK
16/21
B
50 cc
A
125/151 cc
50 cc
125/151 cc
When the ambient temperature is below -5°C °C, use
an oil of viscosity: 5W40
°C
°F
Reproduction or translation, even partial, is forbidden without the written consent of Peugeot Scooters
CHANGING THE ENGINE OIL
We advise you to go to a registered dealer
for draining.
Oil
contains
substances
which
harmful to the environment. Your dealer is
equipped to dispose of used oil without
endangering the environment and in
compliance with current standards.
Engine oil
SAE 5W40 Synthetic API SL/SJ
SAE 10W30 Synthetic API SL/SJ
SAE 5W40 Synthetic API SL/SJ
SAE 15W50 Synthetic API SL/SJ
Quantity
0.65 I at oil change
0.7 I at oil change
5 W 40
10 W 30
10 W 40
15 W 50
-30 -20 -10
0
10
20
30
-22
-4
14
32
60
68
86 104
The engine must be drained when it is warm to allow the
oil to run easier.
are
1
• Place the vehicle on its central stand on flat ground.
• Put on protective gloves.
• Remove the drainage cap and its seal (1) and allow the
oil to drip into a recipient.
• Remove the strainer cap (2) and clean the strainer (3).
40
• Put back the drainage cap and strainer cap, fitted with
a new seal.
• Pour the required quantity of oil corresponding to the
manufacturer's standards into the filler hole.
• Start the engine and let it run for a short while.
• Add oil if necessary.
• Check that the oil drain plug is sealed.
3
2